Cleaning Residential Concrete Floors – Useful Tips

Cement floors provide a stable and durable solution, but are often exposed to a lot more grime, contamination and damage than other types of flooring. Cleaning residential concrete floors, both interior and garages, takes a specific approach plus regular maintenance is necessary to keep them in the best possible condition, preserving their uniform look. That is especially the situation with stained and textured cement floors that are quite popular as floors for certain types of premise.

General servicing tips

Whenever using a wet cleaner, make sure you rinse it well later on and let it dry out before putting it away. Store the mop inside a cool and dry place. Replace the mop heads as often as required. Avoid leaving a wet cleaner inside the bucket.

Interior concrete flooring

Sweep the floor once a week or more, in the event that needed. Use a dry mop for that daily maintenance routine. Vacuuming the floor when it’s dry is a good addition to the particular weekly sweeping. Use a canister type dry vac for best results.

To wash sticky grime, use a warm damp mop.
If you have any inquiries relating to where and how to use Pathway Environmental, you can call us at the web-site.
The warm water helps lift up substances off the floor. Wash the mop often during the procedure. You can also use a steam machine, yet avoid the commercial ones which have deeply clean capabilities, with a shampoo-type feature often included.

Concrete floors in garages

When working on your vehicle or operating with automobile oils, place cardboard sheets or scrap newspaper on the floor to help catch any splatters and prevent contamination of the floor. Whenever that happens, pack up and seal the soaked up paper in a plastic bag, then treat it as a toxic garbage.

If spills of a windshield fluid occurs, rinse the floor with drinking water and use a wet mop to wash it out. Let fresh air go into the garage occasionally possible and allow the particular wet concrete surface to dry out.

Sticky grime can be removed by using a high pressure water sprinkler/sprayer plus a stiff bristle broom. After the strength sprayer does its job and the floor dries up, follow up by sweeping the spot with the broom, eliminating off any dirt that’s remaining. You can use a larger wet vac in between to take care of standing water and particles.

One last thing, keep an eye for issues on your concrete floors regularly. Any cracks should be cleaned up with a hard wire brush or a stiff wire wheel attached to a drill, after that patched up and sealed accordingly.

Leave a Reply

Your email address will not be published. Required fields are marked *