How to cope with a Leaking Diving Mask

The leaky mask can spoil a dive. It’s a real pain to get to spend most of your dive eradicating a mask instead of taking in the particular underwater surroundings. This can be particularly annoying for new divers and if your cover up clearing skills aren’t up-to-par, a leak can even be a bit frightening.

May go out and buy a new mask just because the one leaks
According to my friend Adrian, a long-time diveshop manager and instructor, a lot of people buy more than one mask in their earlier stage of diving because they believe the problem with leaks lies with the dive mask. But the real problem lies with The way the mask is being worn. His record serial mask buyer bought four masks in six months until the girl got a haircut (the culprit was her long hair, captured under the skirt of the mask).

Therefore once you’ve got a comfortable and well-fitting mask, there are things you can do to reduce the leaks problem.

Mask leak avoidance tips

Strap adjustment
Make sure the strap is not too tight. The immediate reaction to a leak for many people would be that the strap is not tight enough. An overly tight mask will make the problem worse – and leave that will mark on your face that won’t disappear for three hours.

A neoprene Mask Strap Cover is really nice intended for preventing hair tangles and brings when you put on and remove the mask – a must have for those with lengthier hair.

Cracks, rips and tears
Check for rips and tear in the mask skirt. This could be a source for leaks.

Take care of your mask. Wash your mask after diving, dried out and store in a box or case to avoid damage.

DO NOT make use of a cheap snorkel mask for diving. They are not designed for diving cannot withstand the pressure at depth. Often buy your scuba diving equipment from trustworthy dealers and shops.

The problem along with hair
Hair in the mask is a very common cause of leaks. If you’re not wearing a hood, make sure you don’t have stray bits of hair in the mask. Link back long hair and crystal clear hair away from your face when putting on your mask.

Long fringes/bangs may cause leaks. A French plait/braid is a sure way around this.

Facial hair is a big culprit. Many men are forced to choose between waxing their moustache to have a less leaking dive or keeping it plus tolerating a watery vision. Cutting the hair that makes contact with the face mask may work and is a less extreme solution.

For men who are determined to keep their facial hair, there are various remedies.
If you enjoyed this article and you would like to obtain more facts regarding ffp2 face mask kindly check out our own web-page.
Silicon gel/salve applied to the moustache prior to the dive is a common one. Avoid petroleum-based products like Vaseline because they can break down silicon.

Purge control device
There are two types of people when it comes to masks and purge valves : those who love it and those who dislike it. The purge valve is really a built-in feature that allows easier clearing/draining of the water from the mask. For fans, it makes clearing easier. For non-fans, the purge valve is just another unnecessary addition that could malfunction.

Personally, I’ve never owned a cover up with a purge valve and I don’t think the old fashioned clearing method is so bad.

No such thing being a waterproof mask
I’m convinced you will not have a perfectly sealed mask (ofcourse not in my lifetime anyways). There will often be small quantities of water entering the mask. With some experience, you get used to it.

Leave a Reply

Your email address will not be published. Required fields are marked *